TUBE REMOVAL

When you need quality tube pulling equipment, we sell the full line of TC Wilson and Elliott Tool Technologies tube pulling equipment. If you already own tube pulling equipment, we can supply all the accessories for your TC Wilson and Elliott pullers.

Download a Catalog or contact us for information.

TC Wilson Catalog – Heat Exchanger Expanders and Tools.pdf

TC Wilson Catalog- Boiler Expanders and Tools.pdf

Tube Pullers

TC Wilson Power Puller WWP1500 Hydraulic Tube Puller-Spear Type

The Wilson Power Puller is designed for 1/2 to 1 1/2-inch (12.7 – 38.1mm) Outer Diameter and features a heavy-duty, double-acting hydraulic cylinder with hydraulic return and a 30-ton capacity. A safety relief valve on the cylinder protects against overpressurizing. Its quick-acting, cylinder-mounted safety lock provides positive engagement with a notched spear extension. All hose connections to the cylinder and pump have quick-disconnect couplings. Maximum operating pressure is 10,000 psi. The Wilson WPP-1500 Tube Puller is available on a rental basis. Please click here if you are interested in Thomas C. Wilson rental equipment.

NOTE: Pullers for larger tube sizes available upon. Ask for details.
NOTE: All spear sizes and accessories available

Electric Hydraulic Tube Puller, Spear Type

Elliott Tube Tugger Semi-Continuous Hydraulic Tube Pulling System

Elliott’s Tube Tugger is a powerful continuous hydraulic tube pulling system for removing any type of tube material effortlessly from heat exchangers, chillers, and other heat transfer vessels.

Tube Size: 0.625” to 1.250” (15.9 – 31.8mm) OD
Type: Tube Puller
Application: Heat exchangers, chillers, and other heat transfer vessels
Pulling Capacity: 30 Ton (27Mt)
Stroke: 3″ (76.2mm)

NOTE: Pullers for larger tube sizes available upon. Ask for details.
NOTE: All spear sizes and accessories available

Tube Cutters

TC Wilson Push Type Tube Cutter

Push Type Tube Cutters are designed for cutting and removing ferrous and non-ferrous tubes with 1/2 to 2-inch (12.7 – 50.8mm) Outer Diameter. These efficient tools cut tubes in seconds and attach to both electric and pneumatic drills. The tube trimmer is attached to the push type tube cutter when considerable tube projection needs to be cut off. Various lengths that are able to cut past the tube sheet are available; depending on the Gauge and the material of tube, bits with protective coating are also available. While it is difficult to cut heavy Gauge tube .016-inch and up, this tool simplifies the process.

NOTE: Pullers for larger tube sizes available upon. Ask for details.
NOTE: All spear sizes and accessories available

TC Wilson One-Revolution

One Revolution Tube Cutters are used in heat exchangers. They cut up to 10-inch thick tube sheets and tube with 1/2 to 1 1/2-inch (12.7 – 38.1mm) Outer Diameter. No special drives are required as Wilson Tube Cutters can be used with a hand wrench or ratchet. These tube cutters are manually operated by a hand wrench or ratchet and can be effectively used to vent tubes before plugging.