Home|Products|Retubing|Installation

TUBE INSTALLATION

When you need to retube an Heat Exchanger or Boiler we sell the best tools in the business from TC Wilson and Elliott Tool Technologies for removal and installation of tubes.

Download a Catalogs and contact us with your requirements.

TC Wilson Catalog – Heat Exchanger Expanders and Tools.pdf
TC Wilson Catalog- Boiler Expanders and Tools.pdf
Elliott-Tool Catalog.pdf

Expanders

Expanders are used to create a mechanical leak-free bond between the tube and tube sheet in new tube installation

TC Wilson 41-C Expander (popular)

  • Model 41-C Expander are suitable for condensers, evaporators and other small vessels.
  • Available in 4 and 5 Roll models
  • Long reach models are available

Elliott Tool Technologies 24 Series (popular)

  • 24 Series Expander are suitable for condensers, evaporators and other small vessels.
  • Available in 4 and 5 Roll models
  • Long reach models are available

Electric Rolling Motors and Torque Controls

TC Wilson Electric Rolling Motor Model 22480-0000

  • Electric Rolling motor for rolling ferrous and non-ferrous tube in boilers, heat exchangers, and other pressure vessels
  • Easy to use, durable and reliable

TC Wilson Electronic Torque Controller Model WTEC-1000

The WTEC-1000 Electronic Torque Controller comes with your choice of electric roller for ferrous and non-ferrous tubes in boilers, heat exchangers and other pressure vessels. The electronic controller is adjustable for expanding torque and will automatically reverse the motor when selected torque is reached. Drive features include a dead handle for added leverage.

Elliott Tool Technologies 99 Series Electric Rolling Motor

  • Tube Size: 0.250″ to 3.000″ (6.4 – 76.2mm) OD
  • Type: Rolling Motor
  • Power: Electric 110V or 220V
  • Torque: Torque Controlled with ELC

Elliott Tool Technologies ECL110220 Electronic Torque Controller

  • Set-up is easy and two to three times faster, even for inexperienced operators.
  • Tube Size: 0.250” to 3.000” (6.35 – 76.2mm)
  • Voltage: 110V to 240V
  • Languages: English or Spanish
  • Compatibility: Elliott’s 99 Series Electric Rolling Motors (other electric motors with optional adapters)
  • Auto-Reverse

Pneumatic Rolling Motors

TC Wilson 909 Right-Angle Tube Roller

Pneumatic, Torque Controlled, Right Angle Tube Rollers for 2 to 4 inch OD. The 909 is a torque-controlled, right-angle pneumatic drive motor for rolling ferrous and nonferrous tubes in water and fire tube boilers and other pressure vessels. Ideal for hard-to-reach and confined spaces.

  • Lightweight
  • Reversible — torque-controlled
  • Heavy-duty gear system
  • Right-angle design gives users built-in leverage
  • Powerful motor
  • 3/4-Inch square spindle

Elliott Tool Technologies 445 Series Right-Angle Rolling Motor

Motor parts are designed to be truly compatible with Cleco® and Airetool® motors, for convenient maintenance of existing motors.

The powerful 445 Series Motors are ideal for tough boiler tube applications. The right angle heads are suitable for rolling tubes in hard to reach, tight areas. Now available in torque controlled & stall type motors.

  • Tube Size: 2.000” to 4.000” (50.8 – 101.6mm) OD
  • Type: Right Angle Pneumatic Rolling Motor
  • Style: Torque Controlled or Stall Type

Expander Lubricate

Expander Lube, Type B

Wilson Expander Lube is a water-soluble lubricant especially compounded for use with tube expanders. When rolling large or small, ferrous or nonferrous tubes, use Wilson Expander Lube for smoother rolling and longer expander life. For clean tube ends after rolling, simply wash with water. Wilson Type B Expander Lube is used straight from the can without dilution.

  • A water-soluble lubricate especially compounded for use with Tube Expanders.
  • Use when rolling large or small, ferrous of non-ferrous tube for smother rolling and longer tool life
  • Available in various size

B-Kool Lubricant Concentrate

Prolong the life — and improve the efficiency — of the Wilson Combination Beading Expander with B-Kool. B-Kool dissipates the heat generated by the Wilson Combination Beading Expander, increasing this Smart Tool’s longevity, performance and productivity. B-Kool is available as a concentrate. Mix 20-24 parts water to one part B-Kool.

Tube Facers

TC Wilson Insert Type Tube End Facer

Tube End Facing Tools – 5/8″ to 2″ Outer Diameter

The Wilson Insert Type Facing Tool features an adjustable collar that provides projection control as well as cutter bits that can be easily replaced, significantly lengthening the life of the product. Delrin Pilots are available for 5/8-inch (15.9mm) and larger tools for non-scoring applications. Wilson Insert Type Tube End Facing Tools can be used on tubes with a 5/8 to 2-inch Outer Diameter (15.9 – 50.8mm).

TC Wilson Insert Type Tube End Facer

Fixed Type: 1/4 to 9/16-Inch Outer Diameter Tubes

The Wilson Fixed Type Tube End Facing Tool features an adjustable collar that provides projection control for flute high-speed steel and allows for simple replacement of pilots. This tool can be used on tubes with a 1/4 to 9/16-inch Outer Diameter (6.4 – 14.3mm).

Elliott Tool Technologies ETF Series Tube Facer

  • For Tube Sizes .375” OD to 1.500” OD
  • ETF series tube facers are for trimming heat exchanger, condenser, and chiller tube to a specific tube projection after tube expansion.
  • Easy blade replacement
  • Standard pilot set included
  • Adjustable

Tube Pilots

Aluminum Tube Guide

  • Used to protect tube ends during retubing
  • Available for 3/8” OD to 1 ¼” OD as standard. Other sizes available upon request.
  • Ensures accurate alignment of tubes through baffle sheets
  • Wide range of gauges available.